Reliable Oil Water Separation Technology for Lawrence KS
In Lawrence KS, industrial, commercial, and municipal sites depend on an effective oil water separator. These are essential to meet environmental rules and avoid expensive waste disposal. Freytech Inc. delivers top-notch Oil Water Separator Lawrence KS. They remove hydrocarbons like motor oil and gasoline from water.
Our EcoLine A separator uses enhanced coalescing technology for superior separation. This is more effective than traditional interceptors or oil traps. It’s an above-ground, surface-mounted system, suited for installation in urban spaces and retrofit sites without excavation.
Freytech is known for reliable, high-performance separators. Choosing our solutions means receiving advanced systems and our help to keep operations safe and compliant. Our team is here to help at every step, from the first consultation to installation and beyond.
When paired with our Automatic Draw-Off Device, it recovers oil at 99.7% purity. This recovered oil is not only an asset—it can be resold, offsetting operational costs and turning waste into value.
Key Benefits of EcoLine A in Lawrence KS
- High-Efficiency Separation: Freytech’s EcoLine A Oil Water Separator Lawrence KS achieves ≤ 5 PPM output for non-emulsified hydrocarbons like gasoline, diesel, and heating oil.
- Above-Ground Configuration: Designed for surface installation in urban, industrial, and retrofit settings—no excavation needed.
- EPA-Compliant and Retrofit-Ready: Exceeds environmental discharge regulations across North America.
- Low-Maintenance Coalescing Media: Spray-washable and reusable for cost efficiency.
- Oil Skimming Capability: When paired with our Automatic Draw-Off Device, recovered oil reaches up to 99.7% purity—an opportunity that can be repurposed, eliminating disposal costs.
Why Choose EcoLine A Oil Water Separator Lawrence KS
Unlike older traps or interceptors, the EcoLine A delivers advanced performance with minimal disruption. Its reusable coalescing media calls for only periodic spray-washing, minimizing the need for costly service contracts or chemical treatments. With its optional Automatic Draw-Off Device, the EcoLine A can support oil recovery at up to 99.7% purity—an environmental and economic advantage. This reclaimed oil is often marketable, turning waste into revenue and helping offset operational costs. Freytech’s solutions enable clients stay compliant. As industries increasingly focus on sustainability, our surface-mounted design and low-maintenance operation offer practical and eco-friendly separation performance.EcoLine A Overview
The EcoLine A is Freytech’s flagship above-ground oil water separator, engineered for efficient separation of non-emulsified light hydrocarbons such as gasoline, diesel, and heating oils. This model delivers consistent ≤ 5 PPM separation performance, meeting discharge standards across North America.
Watch: EcoLine A Animation
This separator is built for both new installations and retrofit projects, offering a low-footprint, plug-and-play solution for space-limited environments. It’s especially beneficial for sites where excavation is either undesirable or impractical.
- Flow Rate Options: Multiple sizes support different site requirements.
- Coalescing Media: Spray-washable, long-lasting plates reduce operating costs.
- Above-Ground Use: Designed for surface-mounted deployment with no digging.
- Optional Oil Skimmer: When added, provides oil recovery at 99.7% purity.
- Regulatory Compliance: Exceeds discharge limits in most municipalities.
Separation Process Behind EcoLine A
An oil water separator operates through the principle that oil is less dense than water, enabling oil to naturally rise to the surface. The EcoLine A utilizes this concept with advanced coalescing technology to achieve effective hydrocarbon removal.
The process begins when contaminated water enters a sedimentation chamber where heavier particles settle. As the flow slows down, water passes through spray-washable coalescing plates that encourage oil droplets to combine and grow.
These larger droplets then rise to the surface, where they are collected. The result is water that meets strict ≤ 5 PPM discharge standards.
The EcoLine A can also be equipped with an Automatic Draw-Off Device for continuous oil removal. This skimmer extracts hydrocarbons with up to 99.7% purity—a valuable asset that can often be monetized.
This efficient, gravity-driven system is both sustainable and easy to maintain. Each component is designed to support high performance while reducing operational and maintenance overhead.
Freytech’s Commitment to Excellence
At Freytech, we’re continually pushing the boundaries of oil water separation technology. Our team engineers solutions like the EcoLine A to meet the evolving needs of modern industries—where compliance, efficiency, and sustainability are non-negotiable.
We emphasize quality assurance, ensuring that every separator we deliver meets stringent performance benchmarks before installation. Our reusable coalescing media and low-maintenance design help reduce environmental impact and operational costs.
But innovation doesn’t stop at the product. Freytech also offers ongoing support—from system selection to maintenance—so our partners can optimize operations from day one.
Our goal is not just compliance—it’s leadership in environmental performance. That’s why Freytech is trusted by municipal, industrial, and commercial operations across North America.
Why Separate Oil and Water
Separating oil from water is critical for environmental safety, regulatory compliance, and operational efficiency. In industries such as fueling services, industrial processing, and food production, oil-contaminated water is a common byproduct.
If untreated, these mixtures can contaminate waterways and endanger aquatic life. They may also compromise potable water supplies and result in costly legal penalties.
Most environmental regulations across North America set hydrocarbon discharge to 10 PPM or less. Freytech’s EcoLine A helps operators meet these standards by consistently delivering ≤ 5 PPM output—even in demanding conditions.
Beyond environmental responsibility, separation has financial benefits. Oil that is removed using Freytech systems can reach up to 99.7% purity when paired with our Automatic Draw-Off Device. This oil can be resold, turning waste into a marketable byproduct in most regions.
Using EcoLine A shows your operation’s commitment to both the planet and the bottom line—an approach that supports long-term sustainability and business success.
Why Choose the EcoLine A
The EcoLine A Oil Water Separator Lawrence KS provides numerous benefits for industrial, municipal, and commercial users. It’s designed to simplify installation, enhance compliance, and reduce operational costs.
- High Separation Efficiency: Delivers ≤ 5 PPM for non-emulsified oils such as gasoline, diesel, and heating oil—surpassing regulatory requirements across North America.
- Reusable Coalescing Media: Durable design minimizes maintenance, reduces downtime, and saves on recurring costs.
- Versatile Deployment: Ideal for surface-level setups where space is limited or excavation is impractical.
- Valuable Oil Recovery: Compatible with our Automatic Draw-Off Device for recovering oil at up to 99.7% purity, which can be resold as a marketable byproduct.
- Environmental Stewardship: Supports sustainability goals by removing harmful hydrocarbons before discharge, preserving ecosystems and public water systems.
Summary
Freytech’s EcoLine A Oil Water Separator Lawrence KS sets the standard for above-ground hydrocarbon separation. With ≤ 5 PPM performance, low-maintenance operation, and retrofit-friendly design, it enables facilities meet strict discharge limits while optimizing space and resources.
If you’re managing runoff from fueling stations, maintenance bays, or wash-down areas, the EcoLine A delivers reliable separation in a compact footprint. Its compatibility with the Automatic Draw-Off Device enhances utility by producing resalable, 99.7% pure oil.
Get in touch to explore how the EcoLine A can enhance your hydrocarbon runoff management in Lawrence KS.
Common Questions
1. What is the EcoLine A’s separation efficiency?
It delivers ≤ 5 PPM separation for non-emulsified hydrocarbons such as gasoline, diesel, and heating oil.
2. Is it compliant with EPA regulations?
Absolutely. EcoLine A aligns with EPA discharge standards across North America, supporting regulatory compliance and environmental safety.
3. What industries use this model?
Industrial facilities commonly rely on the EcoLine A due to its compliance-ready performance in Lawrence KS.
4. What kind of maintenance does it need?
Just a rinse keeps the reusable coalescing media in optimal condition, reducing the need for extraction services.
5. Can it work with an oil skimmer?
It can. The EcoLine A is compatible with the Automatic Draw-Off Device, which offers automated oil recovery at up to 99.7% purity—ideal for resale or recycling.
6. Can it be installed in tight spaces?
Absolutely. Its above-ground, compact design is engineered for retrofit-sensitive locations.
7. Which fluids does it separate?
The system efficiently removes non-emulsified hydrocarbons like heating oil from runoff water.
8. Will it work with my existing drainage layout?
Yes. EcoLine A is retrofit-friendly and is compatible with most existing site plumbing configurations.
9. Is spill prevention possible?
Yes. Add the EcoStop valve for automatic containment in case of overflow or emergency.
10. What size options are available?
We manufacture multiple EcoLine A units tailored to your site’s flow rate and hydrocarbon load requirements.
