Advanced Oil Water Separation Technology for Midland TX
In Midland TX, industrial, commercial, and municipal sites depend on an effective oil water separator. These are essential to meet environmental rules and avoid expensive waste disposal. Freytech Inc. delivers top-notch Oil Water Separator Midland TX. They separate hydrocarbons like motor oil and gasoline from water.
Our EcoLine A separator uses enhanced coalescing technology for superior separation. This is more effective than traditional interceptors or oil traps. It’s an above-ground, surface-mounted system, suited for installation in urban spaces and retrofit sites without excavation.
Freytech is known for reliable, durable separators. Choosing our solutions means getting top technology and our help to keep operations safe and compliant. Our team is here to help from start to finish, from the first consultation to installation and beyond.
When paired with our Automatic Draw-Off Device, it recovers oil at 99.7% purity. This recovered oil is not only an asset—it can be resold, offsetting operational costs and turning waste into value.
Key Benefits of EcoLine A in Midland TX
- High-Efficiency Separation: Freytech’s EcoLine A Oil Water Separator Midland TX achieves ≤ 5 PPM output for non-emulsified hydrocarbons like gasoline, diesel, and heating oil.
- Above-Ground Configuration: Engineered for surface installation in urban, industrial, and retrofit settings—no excavation needed.
- EPA-Compliant and Retrofit-Ready: Supports environmental discharge regulations across North America.
- Low-Maintenance Coalescing Media: Spray-washable and reusable for cost efficiency.
- Oil Skimming Capability: When paired with our Automatic Draw-Off Device, recovered oil reaches up to 99.7% purity—an asset that can be repurposed, eliminating disposal costs.
Advantages of EcoLine A Oil Water Separator Midland TX
Unlike conventional traps or interceptors, the EcoLine A delivers advanced performance with surface-level installation. Its reusable coalescing media calls for only periodic spray-washing, reducing the need for costly service contracts or chemical treatments. With its optional Automatic Draw-Off Device, the EcoLine A can support oil recovery at up to 99.7% purity—an environmental and economic advantage. This reclaimed oil is often resellable, turning waste into revenue and helping offset operational costs. Freytech’s solutions support clients stay compliant. As industries increasingly focus on sustainability, our surface-mounted design and low-maintenance operation deliver practical and eco-friendly separation performance.EcoLine A Features
The EcoLine A is Freytech’s flagship above-ground oil water separator, engineered for efficient separation of non-emulsified light hydrocarbons such as gasoline, diesel, and heating oils. This model ensures consistent ≤ 5 PPM separation performance, meeting discharge standards across North America.
Watch: EcoLine A Overview
This separator is built for both new installations and retrofit projects, offering a low-footprint, plug-and-play solution for space-limited environments. It’s especially beneficial for sites where excavation is either undesirable or impractical.
- Flow Rate Options: Multiple sizes support different site requirements.
- Coalescing Media: Spray-washable, long-lasting plates reduce operating costs.
- Above-Ground Use: Designed for surface-mounted deployment with no digging.
- Optional Oil Skimmer: When added, provides oil recovery at 99.7% purity.
- Regulatory Compliance: Exceeds discharge limits in most municipalities.
Separation Process Behind EcoLine A
An oil water separator functions by the principle that oil is less dense than water, allowing oil to naturally rise to the surface. The EcoLine A utilizes this concept with advanced coalescing technology to achieve effective hydrocarbon removal.
The process begins when contaminated water enters a sedimentation chamber where heavier particles drop out. As the flow is regulated, water passes across spray-washable coalescing plates that encourage oil droplets to combine and grow.
These larger droplets then rise to the surface, where they are collected. The result is water that meets strict ≤ 5 PPM discharge standards.
The EcoLine A can also be equipped with an Automatic Draw-Off Device for hands-free oil removal. This skimmer removes hydrocarbons with up to 99.7% purity—a valuable asset that can often be recycled for profit.
This efficient, gravity-driven system is both sustainable and easy to maintain. Each component is built to support high performance while reducing operational and maintenance overhead.
Freytech’s Commitment to Excellence
At Freytech, we’re constantly pushing the boundaries of oil water separation technology. Our team develops solutions like the EcoLine A to meet the evolving needs of modern industries—where compliance, efficiency, and sustainability are non-negotiable.
We focus on quality assurance, ensuring that every separator we deliver exceeds stringent performance benchmarks before installation. Our reusable coalescing media and low-maintenance design help reduce environmental impact and operational costs.
But innovation doesn’t stop at the product. Freytech also provides ongoing support—from system selection to maintenance—so our partners can maximize value from day one.
Our goal is not just compliance—it’s leadership in environmental performance. That’s why Freytech is trusted by municipal, industrial, and commercial operations across North America.
Why Separate Oil and Water
Separating oil from water is critical for environmental safety, regulatory compliance, and operational efficiency. In industries such as vehicle maintenance, manufacturing, and commercial kitchens, oil-contaminated water is a common byproduct.
If untreated, these mixtures can damage waterways and harm aquatic life. They may also compromise potable water supplies and result in costly legal penalties.
Most environmental regulations across North America set hydrocarbon discharge to 10 PPM or less. Freytech’s EcoLine A helps operators stay within limits by consistently delivering ≤ 5 PPM output—even in demanding conditions.
Beyond environmental responsibility, separation has financial benefits. Oil that is removed using Freytech systems can reach up to 99.7% purity when paired with our Automatic Draw-Off Device. This oil can be reused, turning waste into a recoverable asset in most regions.
Using EcoLine A shows your operation’s commitment to both the planet and the bottom line—an approach that supports long-term sustainability and business success.
Benefits of the EcoLine A
The EcoLine A Oil Water Separator Midland TX provides numerous benefits for industrial, municipal, and commercial users. It’s engineered to simplify installation, enhance compliance, and reduce operational costs.
- High Separation Efficiency: Delivers ≤ 5 PPM for non-emulsified oils such as gasoline, diesel, and heating oil—meeting regulatory requirements across North America.
- Reusable Coalescing Media: Long-lasting design minimizes maintenance, lowers servicing frequency, and saves on recurring costs.
- Versatile Deployment: Ideal for above-ground installations where space is limited or excavation is impractical.
- Valuable Oil Recovery: Compatible with our Automatic Draw-Off Device for recovering oil at up to 99.7% purity, which can be reused as a marketable byproduct.
- Environmental Stewardship: Supports sustainability goals by removing harmful hydrocarbons before discharge, protecting ecosystems and public water systems.
Conclusion
Freytech’s EcoLine A Oil Water Separator Midland TX leads the market for above-ground hydrocarbon separation. With ≤ 5 PPM performance, low-maintenance operation, and retrofit-friendly design, it supports facilities meet strict discharge limits while optimizing space and resources.
Whether you’re dealing with runoff from fueling stations, maintenance bays, or wash-down areas, the EcoLine A delivers reliable separation in a compact footprint. Its compatibility with the Automatic Draw-Off Device provides added functionality by producing resalable, 99.7% pure oil.
Get in touch to explore how the EcoLine A can transform your hydrocarbon runoff management in Midland TX.
Frequently Asked Questions
1. What is the EcoLine A’s separation efficiency?
It delivers ≤ 5 PPM separation for non-emulsified hydrocarbons such as gasoline, diesel, and heating oil.
2. Is it compliant with EPA regulations?
Certainly. EcoLine A aligns with EPA discharge standards across North America, supporting regulatory compliance and environmental safety.
3. What industries use this model?
Fueling stations commonly use the EcoLine A for its compact design in Midland TX.
4. What kind of maintenance does it need?
Simple spray-washing keeps the reusable coalescing media in optimal condition, reducing the need for extraction services.
5. Can it work with an oil skimmer?
It can. The EcoLine A is compatible with the Automatic Draw-Off Device, which enables automated oil recovery at up to 99.7% purity—ideal for resale or recycling.
6. Can it be installed in tight spaces?
Absolutely. Its above-ground, compact design is engineered for urban locations.
7. Which fluids does it separate?
The system efficiently extracts non-emulsified hydrocarbons like diesel from runoff water.
8. Will it work with my existing drainage layout?
Of course. EcoLine A is retrofit-friendly and is compatible with most existing site plumbing configurations.
9. Is spill prevention possible?
Yes. Add the EcoStop valve for spill response in case of overflow or emergency.
10. What size options are available?
We offer multiple EcoLine A units tailored to your site’s flow rate and hydrocarbon load requirements.
